TUBING |
MATERIALS |
GRADES/ALLOYS |
SIZE RANGES |
Aluminum Alloys |
2024, 3003, 5052, 6061, 6063, 7075, Aircraft, Commercial, Construction,
Structural, Mechanical, Drawn, Extruded, Ornamental, Rounds,
Rectangles, Squares |
Outside Diameters – 1/8" to 16"
Wall Thickness' from .020" to 2.000" |
TUBING
Stainless Steel |
303, 304, 304L, 316, 316L, 321, 347, 17-4, 15-5, Aircraft, Commercial,
Heat Exchanger, Hollow Bar, Hypodermic, Instrumentation, Mechanical,
Sanitary, Seamless, Welded and Drawn, As Welded, Ornamental, Round,
Rectangular, Square (Mill and Polished Finish) |
Outside Diameters – .031" to 12"
Wall Thickness' from .004" to 2.000" |
Nickel & High
Performance Alloys |
200, 400, 600, 601, 625, 800, 800H, 825, C276, 21-6-9, Alloy 20,
Aircraft, Commercial, Seamless, Welded |
Outside Diameters – .031" to 7"
Wall Thickness' from .007" to 1-1/2" |
Titanium |
CP, 3AL-2.5V, 15-3-3-3, GR 2, 6AL-4V, Ducting |
Outside Diameters – 1/4" to 8"
Wall Thickness' from .016" to .260" |
Carbon &
Alloy Steel |
Low Carbon, 1020, 1026, 4130, 4135, 4140, 4340, 8620, 52100, Aircraft,
Mechanical, Hydraulic, ERW, DOM, Seamless, Welded, As Welded,
Round, Rectangular, Square, Streamline, Structural Shapes |
Outside Diameters – .125" to 12"
Wall Thickness' from .020" to 3.000" |
• Standard lengths Aluminum 12' • Standard lengths other than Aluminum 17/24' rls
• Purchased to Applicable industry specifications • Custom dimensional requirements available upon request
PIPE |
MATERIALS |
GRADES/ALLOYS |
SIZE RANGES |
Aluminum Alloys |
5083, 5086, 6061, 6063, Construction Grades, Handrail, Drawn,
Extruded, Port Hole Die, Seamless, Structural |
Pipe Sizes – 1/8" NPS to 12" NPS
Schedules from: 10 to 80 |
Stainless Steel |
304, 304L, 316, 316L, 2205, 321, 347, 446, Seamless, Welded,
As Welded, Brewery Quality |
Pipe Sizes – 1/8" NPS to 30" NPS
Schedules from 5 to XXH |
Nickel & High
Performance Alloys |
200, 400, 600, 601, 625, 800, 800H, 800HT, C276, Alloy 20,
Seamless, Welded |
Pipe Sizes – 1/8" NPS to 8" NPS
Schedules from 10 to XXH |
Carbon &
Alloy Steel |
Black, Line, Seamless, Structural, ERW |
Pipe Sizes – 1/8" NPS to 12" NPS
Schedules from: 10 to 80 |
• Standard lengths Aluminum 24' rls • Standard lengths other than aluminum 17/24' rls
Purchased to Applicable industry specifications
ROD, BAR & WIRE |
MATERIALS |
GRADES/ALLOYS |
SIZE RANGES |
Aluminum Alloys |
1100, 2011, 2024, 2219, 6061, 6063, 6101, 7075 |
Rounds – 1/8" to 16"
Hex – 1/4" to 2-3/4"
Squares – 1/4" to 6"
Flats – 1/8" to 5" |
Stainless Steel |
303, 304, 304L, 309S, 316, 316L, 410, 416,
17-4, 15-5, 13-8, Equal & Unequal Angles |
Rounds – 1/8" to 16"
Hex – 1/4" to 2-1/2"
Squares – 1/4" to 3"
Flats – 1/8" to 3"
Edge Conditioned |
Nickel & High
Performance Alloys |
200, 330, 400, 600, 601, 625, 718, X750, 800, 800H, 800AT, 825,
C276, HX, K500, Alloy 20 |
Rounds – 3/16" to 11"
Edge Conditioned |
Titanium |
6AL-4V |
Rounds – 3/8" to 6-1/4" |
Carbon &
Alloy Steel |
300M, 4130, 4140, 4150, 4340, 6150, 8620, 8740, 9310, 52100 |
Rounds – 1/8" to 12"
Hex – 1/4" to 1-1/8" |
• Custom flat bar widths and lengths available upon request • Standard lengths 12' long • Applicable industry specifications
SHEET & PLATE |
MATERIALS |
GRADES/ALLOYS |
SIZE RANGES |
Aluminum Alloys |
2014, 2024, 2024 Alclad, 6061, 7050, 7075, 7075 Alclad |
From .016" thick to 8" thick |
Nickel Alloys |
625, HX, 718 |
From .016" thick to .093" thick |
Titanium |
CP, 5AL-2.5SN, 6AL-4V, 6AL-6V-2SN |
Available in standard thickness x
width x length dimensions |
• Industry standard widths and lengths • PVC Coatings available upon request • Applicable industry specifications
EXTRUSIONS |
MATERIALS |
GRADES/ALLOYS |
SIZE RANGES |
Aluminum Extrusions |
1100, 2014, 2024, 2224, 5052, 5083, 5086,
6061, 6063, 7050, 7075, 7150, 7178 |
Aircraft Extrusions by Mfg Part
Numbers, Angles, Architectural,
A.N.D., H-Beams, I-Beams,
Channels, Structural, Shapes,
Wide Flange, Zee |
• Titanium, stainless steel and Alloy steel extrusions available upon request • Applicable Commercial and Aerospace industry specifications
SPECIALITY PRODUCTS |
MATERIALS |
GRADES/ALLOYS |
SIZE RANGES |
Fittings |
Stainless Steel, Aluminum, Nickel, Titanium |
CryoFit™, CryoLive™, Butt Weld
& Threaded, Flanges, Heads |
Hinge Pin Stock |
Aluminum, Stainless Steel, Titanium |
Standard Aircraft sizes applicable |
Roll Formed
Shapes |
Aluminum |
Aircraft Applications |
• Applicable Commercial and Aerospace industry specifications |
